Sump Pump Installation & Repair Tips

If your sump pump isn’t functioning properly, it might be time for a repair. A sump pump needs to be maintained to prevent basement flooding and other problems that can affect your home’s foundation. But how often do you need a repair? Here are a few things you should keep in mind before hiring a sump pump installation & repair technician:

Problems with float valves

A float valve is one of the most common problems associated with sump pumps. If it malfunctions, it can cause your pump to run continuously, which can cause it to wear out the motor and shorten the life of your system. Normally, a sump pump is activated when the water level in the pit rises above the float. This triggers a series of pumping operations, with water being pumped up the discharge pipe and out of your home through a drain.

Another common problem is intermittent float operation. The float may not be fully open or may be lodged in the float valve. A professional plumber can diagnose the float valve and help you repair it. Sometimes, a faulty valve can result in a clogged pit. Regardless of the cause, it is important to know that there are some easy ways to troubleshoot the issue, so call a plumber to perform the installation.

Check valves

Before attempting to install a new check valve, it is important to understand its role in sump pump installation and repair. First, you must determine where the valve will be installed. This will determine how much room you have to work with to install the valve. Then, you should measure the pipe in the vicinity of the pump. Next, you should determine the diameter of the fittings. You can buy sump pumps from most hardware stores, and most valves can be bought online or in local hardware stores.

The check valve should be positioned at least 10 inches above the sump pump discharge pipe. While municipal governments may have their own requirements for the placement of check valves, the 10-inch rule seems to work well. It is also important to remember that installing a check valve near the sump pump discharge pipe will help limit the amount of water that can accumulate. To install a new check valve, you will need to measure the pipe length. Use hose clamps to measure the pipe.

Float valves

Float valves are integral components of sump pumps. When a sump pump fails to discharge water effectively, it must travel 6-10 feet vertically before exiting the property. Broken check valves add backpressure and strain to the pump. This makes it hard for the sump pump to properly discharge water from the basement or floor. A broken float valve can make it impossible for the pump to discharge water from the basement.

When the float switch is malfunctioning, it may become jammed or lose connection with the pump’s power source. In addition, it may break or get lodged on the side of the basin, causing the pump to operate unnecessarily. Assuming your pump is not prone to malfunctions, the valve must be clean and grounded to prevent the float switch from jamming.

Power backup options

Having a battery backup for your sump pump is an excellent way to keep it running in case it runs out of power. Even if you already have a sump pump, the battery backup will help keep your basement dry during power outages. If you live in an area where rains are common, you may want to consider a backup pump that can work with minimal maintenance. These backup pumps are easy to install and will help protect your home from water damage.

Battery backup pumps don’t require hardwiring, and they can be used in areas with limited electricity. They automatically kick in if the main power goes out, and they can prevent a flooded basement. Battery backup systems have their pros and cons, but they are often a great option for minor seepage. Additionally, battery backups tend to work at high pumping volumes, which is important in areas where strong storms push water toward the foundation.